DEVICE GUIDE
PLA vs PETG vs ABS
A clear breakdown of the three most common filaments and when each is the right choice.
Updated September 1, 2026 · 5 minute read
These are visual browser checks, not manufacturer certification, professional calibration or repair diagnosis.
A focused five-step check
- 01
Compare temperature resistance: PLA is lowest, ABS and PETG tolerate more heat.
- 02
Assess strength and impact: PETG and ABS outperform PLA for functional parts.
- 03
Check chemical and moisture resistance for the environment the part lives in.
- 04
Factor in enclosure needs: ABS warps without an enclosure, PETG and PLA do not.
- 05
Match the filament to the nozzle and hotend temperature ceiling on your printer.
GOOD TO KNOW
AnHot does not fabricate specs — temperatures come from manufacturer profiles and the sources listed on each filament page.